10 Oil Painting Tips You Should to learn

Here are 10 great tips that will help the beginner oil painter get started with this rewarding medium!

Tip #1: Start small.  
Painting small gives you the chance to try out techniques and experiment with color without investing too much time or material into the process.

Tip #2: Set up a space in a well-ventilated area where you can keep your palettes and supplies out and at-the-ready and your paintings visible. 
This will give you the chance to see and think about your work, even if you’re not actually painting.

Tip #3: Buy a few high quality paints and brushes.
Buy professional grade paints as you can afford them rather than student grade. Professional grade has a greater ratio of pigment to binder. Buy only a few higher quality brushes – three different sizes should be good to start with. You can buy more and experiment with the different shapes as you paint more. You can use the same type of brush for oil as you do for acrylic. 

Tip #4: Prime your painting surface. 
You can paint on many different surface – canvas, wood, paper –  but it is important to apply a type of primer called gesso to the painting surface to prevent the oil from seeping into the surface, protect the surface from the acids in the paint, and provide a surface that the paint will adhere to more easily. You can also use pre-primed boards or canvas and apply another coat or two of gesso to them if you like a smoother surface. Ampersand Gessobord is a nice smooth durable surface to work on.

Tip #5:  Understand color and color mixing. 
Primary paint colors are not “pure” but rather lean toward either yellow or blue, making them warm if toward yellow, or cool if toward blue. This influences how the primary colors mix to produce the secondary colors. Read article, Color Wheel and Color Mixing to see how I’ve created secondary colors from the warm and cool primaries. This knowledge will help you keep your mixed colors from getting muddy.

Tip #6: Use a limited painting palette. 
Don’t feel that you have to use all the colors in your painting at once. Start with a monochrome painting, a painting of only one hue plus its shades (black added) and tints (white added). You can use any color you like depending on whether you want a cool or warm painting. This will allow you to get the feel of the paint. When you are ready, add a warm and cool of each primary color to your palette, along earth tones like burnt sienna, burnt umber and yellow ochre.

Tip #7: Start laying out your painting composition and values with an oil sketch. 
This is a thin underpainting consisting of a color and turpentine (or odorless turpentine substitute such as Turpenoid).  This will dry quickly so that you can then add subsequent layers of paint and color without having to wait too long for it to dry.  I often use burnt sienna to lay out values and composition.

Tip #8: Paint thick over thin, and fat over lean. 
That means using thinner paint and less oil in the first layers, saving thicker paint and higher oil content for later layers. This will help ensure that earlier layers dry first and will help to keep your painting from cracking. Start with an underpainting of paint and turpentine, then move to a painting medium of a combination of turpentine and linseed oil in a ratio of 2:1.  Linseed oil can yellow with age (which is more apparent on light colors), but dries faster than other oils. 

Tip #9: Clean your brush between colors and with soap and water when finished painting. 
Oil painting can get messy. Have paper towels and rags handy to wipe excess paint and turpentine off your brushes. Have two containers available while painting – one for turpentine for cleaning your brush between colors and one for medium to mix with your paint.  

Tip #10: Clean up well and dispose of supplies properly. 
Oil paints and mediums are toxic if ingested or absorbed into the skin. Keep them put away and out of reach of pets and small children. Dispose of paints, mediums, rags, paper towels, and disposable paper palettes or paper plates (also good to use as palettes) properly. You should wet or soak rags and paper in water before discarding them since they are flammable, can heat up when drying out, and sometimes spontaneously combust.